XT6 Nut Torque Settings
all numbers in ft-lbs
ENGINE
|
Cylinder head bolts |
main bearing boly |
rod bearing bolts |
cranfshaft damper bolts |
flywheel bolts |
manifold intake |
maifold exhaust |
spark plugs |
lug nut |
1988 |
(1) |
(2) |
29-31 |
66-79 |
51-55 |
13-16 |
19-22 |
13-17 |
58-72 |
1989 |
(1) |
(2) |
29-31 |
66-79 |
51-55 |
13-16 |
19-22 |
13-17 |
58-72 |
1990 |
(1) |
(2) |
29-31 |
66-79 |
51-55 |
13-16 |
19-22 |
13-17 |
58-72 |
1991 |
(1) |
(2) |
29-31 |
66-79 |
51-55 |
13-16 |
19-22 |
13-17 |
58-72 |
(1) -Tighten all bolts in Sequence to 29 ft-lbs
-Tighten all bolts in Sequence to 47 ft-lbs
-loosen all bolts at least 90 degrees in
the reverse order of the tightening sequence
-Tighten all bolts in Sequence to 44-50
ft-lbs
(2) Engine is of the split case design and does not use main
bearing caps. Tighten the case half bolts as follows : 3-4fl-lbs (6mm); 17-20
ft-lbs (8mm); 29-35 ft-lbs (10mm)
XT6 Haven is not resonsible for any possible damage ,.
to your vehicle. by following this information
|